Line performance (simulated)
โMachine cycle360 s machining + 20 s changeover
โParts / hour, line8 machines ยท machining governs
โGantry time per machine
โGantry load
Gantry load is based on assumed axis speeds (X 2 m/s, Y/Z 1 m/s). Slower axes would make the gantry, not the machines, the bottleneck.
Machines
Finished parts out this session: 0
Service routine per machine (Machine 2 shown)
Your sequence: feeder โ buffer ยท door open ยท right (finished) out to buffer ยท left (OP10) flipped into right ยท raw from buffer into left ยท door close ยท finished from buffer to output. Orange rows run inside your 20 s changeover.
Gripper roles
- G1 transport: feeder โ buffer A, buffer B โ output
- G2 unloads the finished part (OP20, right)
- G3 rotary flip gripper: OP10 (left) โ OP20 (right)
- G4 loads the raw part (OP10, left)
Product name ยท proposal
VALLURE GL Series โ Gantry LoaderThis line: GL 3A-8 = 3 servo axes (X, Y, Z), 8 machines. Same family as GL 2A-4.
Colourway
C is new: Dark Gray beam, Carbon pillars and Y beam, orange carriages. Switch to see each live. Orange stays an accent (brand rule: ~5%).
Colours & finishes
RAL numbers are nearest standard matches for the powder-coater; approve against a physical sample.
Logo & nameplate placement
Wordmark on beam front, ร21,000 mm on the 100 mm beam face, outer spans
Wordmark on Y beam, both sidesWhite, 1,250 mm ยท travels with the gantry
X carriage + model codeโGL 3Aโ front and both sides
Signature pinstripeOrange line under the beam front face, full 24 m
Electrical panel doorFull logo ยท โGL Series ยท Gantry Loaderโ ยท HMI ยท nameplate
Nameplate150 ร 100 mm anodised aluminium
Supply, air, serial and year are left blank: not in the documents.
Rules followed
- Logo files used unaltered; above minimum size.
- Carbon / greys dominant, orange only as an accent.
- Geist for all machine lettering.
- Safety colours stay ISO standard. Brother machines and the customer fixture shown neutral and unbranded.